로고

다온테마
로그인 회원가입
  • 제품소개
  • Wilden 펌프
  • 제품소개

    Wilden 펌프

    P8 2" Diaphragm Pump

    페이지 정보

    profile_image
    작성자 PNSENG
    댓글 댓글 0건   조회Hit 102회   작성일Date 21-03-29 13:02

    본문

    51 mm (2") Pro-Flo® Series Clamped Metal PumpP8

    AIR INLET
    • 1/2" FNPT
    LIQUID INLET
    • 51 mm (2")
    LIQUID DISCHARGE
    • 51 mm (2")
    CONNECTION TYPE
    • NPT/BSPT (Threaded)
    MAX SUCTION LIFT CAPABILITY
    • Rubber –6.9 m (22.7') Dry, 8.6 m (28.4') Wet
    • TPE – 6.7 m (22.1') Dry, 8.6 m (28.4') Wet
    • Full-Stroke PTFE – 6.7 m (22.1') Dry, 9.0 m (29.5') Wet
    • Reduced-Stroke PTFE – 4.6 m (15.0') Dry, 9.5 m (31.0') Wet
    • Ultra-Flex™ – 4.9 m (16.0') Dry, 8.8 m (29.0') Wet
    MAX FLOW RATE
    • Rubber – 623 lpm (165 gpm)
    • TPE – 630 lpm (166 gpm)
    • Full-Stroke PTFE – 618 lpm (163 gpm)
    • Reduced-Stroke PTFE – 496 lpm (131 gpm)
    • Ultra-Flex™ – 526 lpm (139 gpm)
    MAX PRESSURE
    • 8.6 bar (125 psi)
    MAX DIAMETER SOLIDS
    • 6.4 mm (1/4'')
    DISPLACEMENT PER STROKE *
    • Rubber – 2.6 L (0.70 gal)
    • TPE – 2.8 L (0.75 gal)
    • Full-Stroke PTFE – 2.6 L (0.70 gal)
    • Reduced-Stroke PTFE – 1.67 L (0.44 gal)
    • Ultra-Flex™ – 2.12 L (0.56 gal)
    * 1 cycle = 2 strokes

    Features and Benefits

    Featuring the original air-operated double-diaphragm pump design by Jim Wilden, clamped metal pumps offer a simple, rugged design for general industrial applications. Designed with ease of maintenance in mind, clamped pumps are simple to install and are made for quick serviceability, allowing the pump to be taken apart and put back together with only a single tool. Proven by the test of time, hundreds of thousands of Jim Wilden's clamped pumps have pumped billions of gallons of fluid on an annual basis.

    • NPT and BSP threaded inlet/discharge liquid connections for quick disconnect/connect
    • Decades of proven performance
    • Clamped connections for faster maintenance
    • Low cost
    • Simple installation
    • Ease of operation and maintenance

    Downloads

    Spec Sheets

    Model: P8 | Code: WIL-10184-T-02

    Performance and Specifications

    Dimensions

    Dim-P8-51mm2in-CMP

    Note: Dimensions vary by material and connection. For additional information, please refer to the P8 Metal Manual.

    Flow Curve – TPE-Fitted

    Flo-P8-51mm2in-CMP

    Note: Additional performance curves can be found in the P8 Metal Manual.

    AIR INLET
    • 1/2" FNPT
    LIQUID INLET
    • 51 mm (2")
    LIQUID DISCHARGE
    • 51 mm (2")
    CONNECTION TYPE
    • NPT/BSPT (Threaded)
    MAX FLOW RATE
    • Rubber – 623 lpm (165 gpm)
    • TPE – 630 lpm (166 gpm)
    • Full-Stroke PTFE – 618 lpm (163 gpm)
    • Reduced-Stroke PTFE – 496 lpm (131 gpm)
    • Ultra-Flex™ – 526 lpm (139 gpm)
    MAX PRESSURE
    • 8.6 bar (125 psi)
    MAX DIAMETER SOLIDS
    • 6.4 mm (1/4'')
    MAX SUCTION LIFT CAPABILITY
    • Rubber –6.9 m (22.7') Dry, 8.6 m (28.4') Wet
    • TPE – 6.7 m (22.1') Dry, 8.6 m (28.4') Wet
    • Full-Stroke PTFE – 6.7 m (22.1') Dry, 9.0 m (29.5') Wet
    • Reduced-Stroke PTFE – 4.6 m (15.0') Dry, 9.5 m (31.0') Wet
    • Ultra-Flex™ – 4.9 m (16.0') Dry, 8.8 m (29.0') Wet
    DISPLACEMENT PER STROKE *
    • Rubber – 2.6 L (0.70 gal)
    • TPE – 2.8 L (0.75 gal)
    • Full-Stroke PTFE – 2.6 L (0.70 gal)
    • Reduced-Stroke PTFE – 1.67 L (0.44 gal)
    • Ultra-Flex™ – 2.12 L (0.56 gal)
    * 1 cycle = 2 strokes

    Wetted Housings

    MATERIALSHIP WEIGHT
    Aluminum32 kg (70 lb)
    Stainless Steel51 kg (112 lb)
    Cast Iron
    47 kg (104 lb)
    Alloy C
    52 kg (114 lb)

    Non-Wetted Housings

    DESCRIPTIONMATERIAL
    Center BlockPolypropylene
    Air ValvePolypropylene
    Air ChamberAluminum, PTFE-Coated, Nickel-Plated, Stainless Steel, Halar-Coated Aluminum


    Elastomer Options

    MATERIALTEMPERATURE LIMITS
    Buna-N-12°C to 82°C (10°F to 180°F)
    EPDM-51°C to 138°C (-60°F to 280°F)
    FKM-40°C to 177°C (-40°F to 350°F)
    Neoprene-18°C to 93°C (0°F to 200°F)
    PTFE*4°C to 104°C (40°F to 220°F)
    Polyurethane-12°C to 66°C (10°F to 150°F)
    Saniflex™-29°C to 104°C (-20°F to 220°F)
    Wil-Flex™-40°C to 107°C (-40°F to 225°F)

    * 4°C to 149°C (40°F to 300°F) - 13 mm (1/2") and 25 mm (1") models only


    댓글목록

    등록된 댓글이 없습니다.